• Solutions
    Back to Solutions
    • Format Adjustment
      Back to Format Adjustment
      • Packaging Technology
        Back to Packaging Technology
        • Carton Erectors
        • Cartoning Systems
        • Labeling and Marking Systems
        • Side Guides and Transport Systems
        SIKO positioning systems for carton erectors Positioning systems for cartoning machines SIKO positioning systems for labeling machines SIKO positioning systems for side guides and conveyor belts
      • Woodworking
        Back to Woodworking
        • Edge Trimming Machines
        • Planing and Molding Machines
        • Panel Saws
        • Dowel Hole Drilling Machines
        Positioning systems for edgebanding machines by SIKO Positioning systems for planing and molding machines by SIKO Positioning systems for panel saws by SIKO Positioning systems for dowel drilling machines by SIKO
    • Mobile Automation
      Back to Mobile Automation
      • Construction Machines
        Back to Construction Machines
        • Excavators
        • Wheel Loader
        • Telehandlers
        • Truck-Mounted Concrete Pumps
        Application model chain excavator in blue Application model wheel loader in blue Application model telescopic loader in blue Application model concrete pump in blue
      • Crane and Lifting Technology
        Back to Crane and Lifting Technology
        • Mobile Cranes
        • Aerial work platforms
        • Lattice mast cranes
        • Work platforms
        • Telehandlers
        Application model mobile crane in blue Application model scissor lift in blue Application model work platform in blue Application model work platform in blue
      • Mobile Hydraulics
        Back to Mobile Hydraulics
        • Hydraulic Cylinders
        • Telescope Cylinders
        • Piston Accumulators
        SIKO position sensors for hydraulic cylinders SIKO Sensor solutions for telescopic cylinders SIKO sensor solutions for piston accumulators
    • Drive Technology and Robotics
      Back to Drive Technology and Robotics
      • Motor Feedback
        Back to Motor Feedback
        • Linear Drives
        • Torque Motors
        • Gearboxes and Geared Motors
        Application Image Encoder Systems for Linear Motors Application image motor feedback for torque motors Application Image Encoder for Gears and Gear Motors
      • Assembly and Handling Technology
        Back to Assembly and Handling Technology
        • Pick & Place
        • Portal Axes
        Application Image Encoder for Pick & Place Systems Application image encoder for portal axes
      • Robotics
        Back to Robotics
        • Cobots
        Application image encoder for cobots
  • Products
    Back to Products
    • Product index
    • Positioning Systems
      Back to Positioning Systems
      • Mechanical Position Indicators
        Back to Mechanical Position Indicators
        • Digital Position Indicators
        • Control Knobs
        • Handwheels
        • Analog Position Indicators
        • Clamping Plates
      • Elektronic Position Indicators
      • Positioning Drives
      • Retrofit Systems
    • Linear Sensors
      Back to Linear Sensors
      • Linear Encoders | MagLine
        Back to Linear Encoders | MagLine
        • Incremental Linear Encoders | MagLine
        • Absolute Linear Encoders | MagLine
      • Draw-Wire Encoders
        Back to Draw-Wire Encoders
        • Draw-Wire Encoders
        • Safety Draw-Wire Encoders
      • Position Sensors for Hydraulic Cylinders
      • Measurement Displays for Linear Encoders | MagLine
      • Scales | MagLine
        Back to Scales | MagLine
        • Incremental Scales | MagLine
        • Absolute Scales | MagLine
      • Customized Linear Sensors
    • Rotary Sensors
      Back to Rotary Sensors
      • Rotary Encoders
        Back to Rotary Encoders
        • Absolute Rotary Encoders
        • Safety Rotary Encoders
        • Incremental encoders
        • Geared Potentiometers
        • Bearingless encoders | MagLine
      • Bearingless Encoders | MagLine
        Back to Bearingless Encoders | MagLine
        • Incremental Bearingless Encoders | MagLine
        • Absolute Bearingless Encoders | MagLine
      • Inclinometers
      • Measurement Displays for Bearingless Encoders | MagLine
      • Scales | MagLine
        Back to Scales | MagLine
        • Incremental Scales | MagLine
        • Absolute Scales | MagLine
      • Customized Rotary Sensors
  • Services
    Back to Services
    • Product Advice
    • After Sales Support
    • Repairs and Maintenance
    • Training Courses and Workshops
    • Downloads
    • Tutorials and Videos
  • About us
  • Newsroom
  • Events
  • Contact
en
Deutsch Englisch Italiano Español 中文 Französisch

Draw-wire encoder SGH10

Position sensor for hydraulic cylinders with measuring lengths up to 1000 mm
SIKO Global, Draw-wire encoder SGH10
SIKO Global, Draw-wire encoder SGH10
SIKO Global, Draw-wire encoder SGH10
SIKO Global, Draw-wire encoder SGH10
SIKO Global, Draw-wire encoder SGH10
SIKO Global, Draw-wire encoder SGH10
The SGH wire-actuated encoder measures the absolute, direct cylinder stroke in the hydraulic cylinder. Cost-intensive drilling of the piston is no longer required thanks to the new measurement system. As a result there are lower integration costs compared with other measurement systems and weakening of the piston is effectively avoided. The highlight: The measurement system can even be used in telescopic cylinders! In the framework ofSPS IPC Drives 2015, exhibition and online visitors nominated the SGH10 as the winner of the DirectIndustry i-NOVO Award in the TECH category.
  • Measuring range 0 … 1000 mm (39.37 inches)
  • Absolute measuring system
  • CANopen interface, analog: Current and voltage
  • Operating voltage 9 ... 32 VDC
  • Pressure-resistant up to 350 bar, pressure peaks up to 450 bar
  • High flexibility, thanks to teach-in to any measuring length
  • High EMC compatibility
  • High shock and vibration resistance
  • with PURE.MOBILE technology
Ben King
Ben King
Inside Sales
+1 734 426-3476 ben.king(at)siko-global.com
August Meyers
August Meyers
Manager Business Unit Mobile Automation
+1 734 426-3476 august.meyers(at)siko-global.com
Watch expert video
Add to Watchlist
  • Technical drawing
  • Technical Specifications
  • System components
  • Purchase order
  • Downloads
  • Accessories
  • Comparable products

Technical drawing

SIKO Global, Draw-wire encoder SGH10

Technical Specifications

Mechanical data
Electrical data
System data
Ambient conditions
Feature
Technical Specifications
Enhancement
Weight
~0.15  kg
Flange
 aluminum
sealing ring (HNBR)
Housing
 plastic
PA66
Wire design
ø0.45  mm
rustproof stainless steel
Extension force
≥2  N
Acceleration
≤10  m/s²

Schnittstelle analog

Feature
Technical Specifications
Enhancement
Operating voltage
 9 …  32 V DC
with output 0 … 5 V, 0.5 … 4.5 V, 0.25 … 4.75 V, 1.0 … 4.9 V, reverse polarity protected
 12 …  32 V DC
with output 0 … 10 V, reverse polarity protected
 12 …  32 V DC
at output 0 ... 20 mA, 4 … 20 mA, but UB > Uload +2.0 V, reverse polarity protected
Current consumption
<32  mA
without load
Power input
<0.5  W
without load
Parameter storage
105 cycles
also applies to calibration operations
Digital inputs
 2   
limit inputs
Input signal level high
>8.4  V
Input signal level low
<2.8  V
Output voltage
 0 …  10 V
load current <1 mA
 0 …  5 V
load current <1 mA
 0.5 …  4.5 V
load current <1 mA
 0.25 …  4.75 V
load current <1 mA
 1 …  4.9 V
load current <1 mA
Output current
 0 …  20 mA
load ≤500 Ω
 4 …  20 mA
load ≤500 Ω
Linearity tolerance
±0.25  %
1000 mm measuring length, ±0.5% output value range ≤15 mV
±0.5  %
500 mm measurement length
Settling time
<150  ms
Type of connection
 connector system
KV1H accessory

Schnittstelle CANopen

Feature
Technical Specifications
Enhancement
Operating voltage
 10 …  30 V DC
reverse polarity protection
Power input
<0.8  W
Parameter storage
105 cycles
also applies to calibration operations
Linearity tolerance
±0.25  %
1000 mm measuring length, ±0.5% output value range ≤15 mV
±0.5  %
500 mm measurement length
Interface
 according to ISO 11898-1, not electrically isolated
CANopen, CiA 301, CiA 305, CiA 406
Address
 1 …  127  
Node ID, via SDO or Layer Setting Service (LSS)
Baud rate
≤1  Mbit/s
Cycle time
 1.5  ms  typical
Settling time
<150  ms
Type of connection
 connector system
KV1H accessory
Feature
Technical Specifications
Enhancement
Scanning
 magnetic
Resolution
 12  bit
analog output
Repeat accuracy
±0.15  mm
Measuring range
 500  mm
Measuring range flexibly usable between 0 ... 500 mm
 1000  mm
Measuring range flexibly usable between 0 ... 1000 mm
Travel speed
≤1  m/s
Failure rate
 235.6  Year(s)
analog output, at 60° C (MTBF)according to SN 29500
 253.3  Year(s)
CANopen, at 60° C (MTBF)according to SN 29500
Approval
 E1 compliant
UN /ECE R10 approval number: E1 10 R - 05 8507
Feature
Technical Specifications
Enhancement
Ambient temperature
 -40 …  105 °C
electronics
 -30 …  100 °C
mechanics, optionally to 105° C
Storage temperature
 -40 …  85 °C
Relative humidity
 100  %
condensation admissible in the mounted and plugged condition
Operating pressure
<350  bar
Pn based on ISO19879
Overload pressure
<450  bar
Pmax based on ISO 19879
Test pressure
 650  bar
Pstatic based on ISO 19879
EMC
 EN 61326-3.1
immunity requirement of industrial applications, emission limit class B
 ISO 11452-1, -2, -3, -4, -5
Interference radiation ESA
 ISO 7637-1, -2
transient pulses
 ISO 10605
Electrostatic discharge (ESD)
Protection category
 IP6K9K
ISO 20653, fitted with KV1H and suitable mating connector
Shock resistance
1000 m/s2, 11 ms
EN 60068-2-27
Vibration resistance
70 m/s2, 10 … 2 kHz
EN 60068-2-64

System components

SIKO Global, Draw-wire encoder SGH10
Draw-wire encoder SGH10
SIKO Global, Cable extension KV1H
Cable extension KV1H

Purchase order

Product configuration

Feature

Select specifications

Enhancement

Select your specifications:

Measuring range

500

500

500
1000
in mm

Interface

0/5V

0/5V

0/5V

0 … 5 V

voltage output
0/10V

0 … 10 V

voltage output
0,25/4,75V

0.25 … 4.75 V

voltage output
0,5/4,5V

0.5 … 4.5 V

voltage output
1,0/4,9V

1.0 … 4.9 V

voltage output
0/20mA

0 … 20 mA

current output
4/20mA

4 … 20 mA

current output
CAN

CANopen

Your order key

SGH10 - 500 - GW6 - 0/5V - M1 - DS - SW
Would you like to request a non-binding offer?
Quantity:

Downloads

Data sheet

PDF

DE
EN
IT
ES
ZH
FR

Quick Start Guide

PDF

DE | EN

User manual

CANopen

PDF

DE
EN

3D-CAD model

ZIP

CAD-Modell

EU-conformity declarations

PDF

DE | EN

Installation Instructions

PDF

DE | EN

Setup-Package

ZIP

Download

Certificate

E1

PDF

DE | EN

CKCA conformity declarations

PDF

EN

Accessories

SIKO Global, Programming tool ProTool SGH
Programming tool ProTool SGH

  • Programming tool for analog sensors of the SGH series

  • Free programming of the measuring range and of the analog interface

  • Windows-compatible - plug & play

Go to Product
SIKO Global, Installation tool ZB4004
Installation tool ZB4004

  • Mounting aid for the SGH10 wire-actuated encoder

  • For easy mounting of the SGH10 into welded cylinders

  • Flexibly usable for any cylinder shape and cylinder stroke

Go to Product
SIKO Global, Rope swivel ZB4009
Rope swivel ZB4009

  • to compensate for the rotary movement of the piston head in piston accumulators or hydraulic cylinders

  • suitable for speed and position capturing

  • for wire-actuated encoders in the SGH series

Go to Product
SIKO Global, Socket wrench ZB4008
Socket wrench ZB4008

  • for easy mounting of the M6 fastening screw of wire-actuated encoders in the SGH series

  • slotted side prevents damage to the wire during assembly

Go to Product
SIKO Global, Wire extension piece SVH
Wire extension piece SVH

  • for wire-actuated encoders in the SGH series

  • for lengthening the measuring wire or the distance to the measuring object (the measuring path is not lengthened)

  • Easy mounting

Go to Product

Comparable products

SIKO Global, Draw-wire encoder SGH10L
Draw-wire encoder SGH10L

  • Measuring range 0 … 1000 mm (39.37 inches)

  • almost no stoke lost thanks to lateral mounting

  • Absolute measuring system

Go to Product

Scope of delivery

  • SGH10
  • Installation Instructions

Watchlist

Watchlist

Contact

Contact

SIKO Products Inc., Headquarters/Sales North America

Do you have questions about our company or our products?

We would be happy to help you.

sales.us(at)siko-global.com

+1 734 426-3476

Headquarters

SIKO GmbH

Weihermattenweg 2

79256 Buchenbach

Germany

Contact
+49 7661 394-0
info(at)siko-global.com
Subscribe to newsletter
Visit us at

Facebook

Xing

Linkedin

Instagram

Youtube

X

Solutions
  • Format Adjustment
  • Mobile Automation
  • Drive Technology and Robotics
Products
  • Product index
  • Positioning Systems
  • Linear Sensors
  • Rotary Sensors
Services
  • Product Advice
  • After Sales Support
  • Repairs and Maintenance
  • Training Courses and Workshops
  • Downloads
  • Tutorials and Videos
Company
  • About us
  • Newsroom
  • Events
  • Contact
  • Legal Notice
  • Data Privacy
  • GTC
  • Cookie settings
© Copyright 2024 SIKO GmbH