Absolute encoder WV3600MO
Magnetic rotary encoder for offshore applications
![](/fileadmin/_processed_/e/c/csm_27784_CANOPENLOGO_PRINT_e2797370e3.jpg)
![](/fileadmin/_processed_/2/4/csm_33688_LOGO_SAEJ1939_820f8170bd.jpg)
Specially developed to provide safe and precise values even under the toughest requirements, the absolute rotary encoder WV3600MO is ideally suited for use in offshore applications. As part of the PURE.MOBILE modular sensor system, the WV3600MO meets the high quality requirements for robustness, safety and reliability. Available as a singleturn and multiturn version and with an outer diameter of only 36 mm, not only 65536 rotations can be captured, but it can also be mounted in applications with extremely limited installation space.
- Suitable for offshore applications (severity level 5)
- Single turn or multiturn variant available
- Extremely compact and very robust design
- Protection class up to IP6K9K
- Encreased shaft load
- with PURE.MOBILE technology
Technical drawing
Technical Specifications
Mechanical data
Electrical data
System data
Ambient conditions
Feature
Technical Specifications
Enhancement
shaft
 rustproof stainless steel
Flange
 rustproof stainless steel
Housing
 rustproof stainless steel
Speed
≤3000
 min-1
Moment of inertia
3.5
 gcm²
4
 gcm²
 with protection class IP6K9K
Starting torque
≤2
 Ncm
 at 20 °C
Shaft load rating
≤60
 N
radial
≤40
 N
axial
≤200
 N
 with protection class IP6K9K
radial
≤200
 N
 with protection class IP6K9K
axial
Feature
Technical Specifications
Enhancement
Operating voltage
8 … 36 V DC
reverse polarity protection
Power input
≤1
 W
 at 36 V
without load
Parameter storage
105 cycles
also applies to calibration operations
Status display
 1x two-color LEDs (red/green)
Device/CAN status
Power rating
±36
 V
CAN interface
Interface
 according to ISO 11898-1/2, not electrically isolated
CANopen
 according to ISO 11898-1, not electrically isolated
SAE J1939
Address
1 … 127
CANopen
128 … 238
SAE J1939
Baud rate
20
 kbit/s
CANopen
50
 kbit/s
CANopen
125
 kbit/s
CANopen, SAE J1939
250
 kbit/s
CANopen, SAE J1939
500
 kbit/s
CANopen, SAE J1939
800
 kbit/s
CANopen
1
 Mbit/s
CANopen
Cycle time
<10
 ms
Starting time
<1000
 ms
Parameter
 according to CiA 301, CiA 303 Part 3, CiA 305, CiA 406
CANopen
 according to SAE J1939-21, -71, -81, DA
SAE J1939
Type of connection
 1x M12-plug connector (A-coded)
5-pin, 1x pin (E12E connection type)
 open cable end
Stranded wire cross-section 0.5 mm² ( E1 connection type)
Feature
Technical Specifications
Enhancement
Scanning
 magnetic
Resolution
14
 bit
singleturn, 16384 steps/revolution
Measuring range
1
 rotation(s)
singelturn
4096
 rotation(s)
12 bit
65536
 rotation(s)
16 bit
Feature
Technical Specifications
Enhancement
Ambient temperature
-40 … 85 °C
Storage temperature
-40 … 85 °C
Relative humidity
100
 %
condensation admissible
Protection category
 IP67, IP6K9K
EN 60529, ISO 20653, according to assembly instructions and with suitable mating connector
 IP6K9K
ISO 20653
Salt spray test
 severity level 5
EN 60068-2-52, salt spray test: 4 cycles, 28 days: installed according to assembly instructions and with suitable mating connector
More information
pin assignment
E12E
Signal |
PIN |
nc |
1 |
+UB |
2 |
GND |
3 |
CAN_H |
4 |
CAN_L |
5 |
E1
Signal |
Cable color |
nc |
white |
+UB |
brown |
GND |
green |
CAN_H |
yellow |
CAN_L |
gray |
Purchase order
Product configuration
Feature
Select specifications
Enhancement
Select your specifications:
interface/
protocol
CAN
number of revolutions
1
shaft diameter x length
10x20
Mounting type
M1
Protection category
IP67
only with mounting type M4
position of electrical connection
A
Type of connection
E1
Cable length
OK
only with connection type E12E
in m
only with connection type E1
Scope of delivery
- WV3600MO
- Quick Start Guide