Find the right sensor technology

SIKO Sensor solutions for the slewing ring of a lattice boom crane

1

Detection of slewing ring positions

Fitting Products

2

Detection of slewing ring position in a slip ring

Fitting Products

1

Detection of slewing ring positions

Fitting Products

2

Detection of slewing ring position in a slip ring

Fitting Products

3

Position and velocity detection of cable winches

Fitting Products

3

Position and velocity detection of cable winches

Fitting Products

4

Detection of mast installation angles

Fitting Products

4

Detection of mast installation angles

Fitting Products

5

Position detection of drivers’ cabs

Fitting Products

5

Position detection of drivers’ cabs

Fitting Products

6

Detection of the undercarriage width

Fitting Products

6

Detection of the undercarriage width

Fitting Products
1

Detection of slewing ring positions

  • Extremely robust rotary encoders with high bearing load 
  • Use for safety-critical applications up to PLd 
  • With special slewing ring functionality available
SIKO Global, Absolute encoder WV3600MR
Absolute encoder WV3600MR

  • Smallest safety multiturn rotary encoder for mobile machines

  • Single turn or multiturn variant available

  • SIL2 (IEC 61508) PLd (DIN EN ISO 13849) certified (in preparation)

Go to Product
SIKO Global, Absolute encoder WV3600M
Absolute encoder WV3600M

  • CANopen (DS406) or SAE J1939 interface

  • Extremely compact design with ø36 mm flange

  • Single turn or multiturn variant available

Go to Product
SIKO Global, Absolute encoder WH3600MR
Absolute encoder WH3600MR

  • Smallest safety multiturn rotary encoder for mobile machines

  • Single turn or multiturn variant available

  • SIL2 (IEC 61508) PLd (DIN EN ISO 13849) certified (in preparation)

Go to Product
SIKO Global, Absolute encoder WV58MR
Absolute encoder WV58MR

  • absolute redundant safety encoders

  • CANopen Safety or CANopen redundant interface

  • Can be used in applications up to performance level PLd

Go to Product
SIKO Global, Absolute encoder WV5800M
Absolute encoder WV5800M

  • CANopen (DS406) or SAE J1939 interface

  • Salt spray tested housing available

  • High EMC compatibility

Go to Product
SIKO Global, Absolute encoder WH58MR
Absolute encoder WH58MR

  • absolute redundant safety encoders

  • CANopen Safety or CANopen redundant interface

  • Can be used in applications up to performance level PLd

Go to Product
2

Detection of the slewing ring position in a slip ring

  • Space-saving integration directly in a slip ring
  • Large hollow shaft diameters available for the feed-through of hydraulic lines
  • Bearingless and wear-free magnetic measuring technology
SIKO Global, Magnetic sensor MSAC200
Magnetic sensor MSAC200

  • Industrial and medical applications e.g., motor feedback, handling automation and robotics

  • Integration into small installation space possible

  • Absolute resolution up to 20 Bit

Go to Product
SIKO Global, Magnetic ring MRAC200
Magnetic ring MRAC200

  • Integration into small installation space possible

  • Use with MSAC200 magnetic sensor

  • Different hollow shaft diameters (customized adjustments on request)

Go to Product
3

Position and speed detection of cable winches

  • Precise detection of position and speed for the realization of dynamic automation solutions
  • Reliable mechanical coupling thanks to positive-locking shafts or highly integrated bearingless measurement technology
  • Use in safety-critical applications up to PLd for safe lifting and lowering of heavy loads
SIKO Global, Absolute encoder WV58MR
Absolute encoder WV58MR

  • absolute redundant safety encoders

  • CANopen Safety or CANopen redundant interface

  • Can be used in applications up to performance level PLd

Go to Product
SIKO Global, Absolute encoder WV5800M
Absolute encoder WV5800M

  • CANopen (DS406) or SAE J1939 interface

  • Salt spray tested housing available

  • High EMC compatibility

Go to Product
SIKO Global, Absolute encoder WV3600MR
Absolute encoder WV3600MR

  • Smallest safety multiturn rotary encoder for mobile machines

  • Single turn or multiturn variant available

  • SIL2 (IEC 61508) PLd (DIN EN ISO 13849) certified (in preparation)

Go to Product
SIKO Global, Absolute encoder WH5800M
Absolute encoder WH5800M

  • Hollow shaft to ø 15 mm

  • CANopen (DS406) or SAE J1939 interface

  • Salt spray tested housing available

Go to Product
SIKO Global, Absolute encoder WH58MR
Absolute encoder WH58MR

  • absolute redundant safety encoders

  • CANopen Safety or CANopen redundant interface

  • Can be used in applications up to performance level PLd

Go to Product
SIKO Global, Absolute encoder WH3600MR
Absolute encoder WH3600MR

  • Smallest safety multiturn rotary encoder for mobile machines

  • Single turn or multiturn variant available

  • SIL2 (IEC 61508) PLd (DIN EN ISO 13849) certified (in preparation)

Go to Product
SIKO Global, Magnetic sensor MSAC200
Magnetic sensor MSAC200

  • Industrial and medical applications e.g., motor feedback, handling automation and robotics

  • Integration into small installation space possible

  • Absolute resolution up to 20 Bit

Go to Product
SIKO Global, Magnetic ring MRAC200
Magnetic ring MRAC200

  • Integration into small installation space possible

  • Use with MSAC200 magnetic sensor

  • Different hollow shaft diameters (customized adjustments on request)

Go to Product
4

Detection of the installation angle of masts

  • Cylinder-integrated: no drilling of the piston necessary
  • Rotary: robust and safe rotary encoders provide precise angle values for calculating load torque limitation
  • Inclination: reliable inclination detection even under high levels of interference, such as shocks and vibrations
SIKO Global, Draw-wire encoder SGH50
Draw-wire encoder SGH50

  • Measuring range 0 … 5000 mm (196.85 inches)

  • Absolute measuring system

  • Pressure-resistant up to 350 bar, pressure peaks up to 450 bar

Go to Product
SIKO Global, Absolute encoder WV58MR
Absolute encoder WV58MR

  • absolute redundant safety encoders

  • CANopen Safety or CANopen redundant interface

  • Can be used in applications up to performance level PLd

Go to Product
SIKO Global, Absolute encoder WV5800M
Absolute encoder WV5800M

  • CANopen (DS406) or SAE J1939 interface

  • Salt spray tested housing available

  • High EMC compatibility

Go to Product
SIKO Global, Absolute encoder WV3600MR
Absolute encoder WV3600MR

  • Smallest safety multiturn rotary encoder for mobile machines

  • Single turn or multiturn variant available

  • SIL2 (IEC 61508) PLd (DIN EN ISO 13849) certified (in preparation)

Go to Product
SIKO Global, Absolute encoder WV3600M
Absolute encoder WV3600M

  • CANopen (DS406) or SAE J1939 interface

  • Extremely compact design with ø36 mm flange

  • Single turn or multiturn variant available

Go to Product
SIKO Global, Inclinometer IMS360
Inclinometer IMS360

  • 6 Axis Inertial Measurement Unit (IMU)

  • Compensation of external acceleration thanks to innovative sensor fusion

  • Dynamically compensated inclination measurement (360° or ±90°)

Go to Product
SIKO Global, Inclinometer IKM360R
Inclinometer IKM360R

  • Redundant one-axis or two-axis inclination sensor (0 … 360° oder -80 … +80°)

  • Resolution of 0.001°

  • Accuracy ±0.8°, over the entire measuring and temperature ranges

Go to Product
5

Position detection of the driver's cab

  • Compact design for easy integration into the overall system
  • Robust housing and high degree of protection up to IP6K9K
  • Stable position signal even under high external influences
SIKO Global, Absolute encoder WV5800M
Absolute encoder WV5800M

  • CANopen (DS406) or SAE J1939 interface

  • Salt spray tested housing available

  • High EMC compatibility

Go to Product
SIKO Global, Absolute encoder WV3600MR
Absolute encoder WV3600MR

  • Smallest safety multiturn rotary encoder for mobile machines

  • Single turn or multiturn variant available

  • SIL2 (IEC 61508) PLd (DIN EN ISO 13849) certified (in preparation)

Go to Product
SIKO Global, Absolute encoder WV3600M
Absolute encoder WV3600M

  • CANopen (DS406) or SAE J1939 interface

  • Extremely compact design with ø36 mm flange

  • Single turn or multiturn variant available

Go to Product
SIKO Global, Inclinometer IMS360
Inclinometer IMS360

  • 6 Axis Inertial Measurement Unit (IMU)

  • Compensation of external acceleration thanks to innovative sensor fusion

  • Dynamically compensated inclination measurement (360° or ±90°)

Go to Product
6

Detection of chassis widths

  • Durable & robust draw-wire encoders for precise position detection
  • Compact draw-wire encoders enable integration into the system or complete integration of the sensor in hydraulic cylinders
  • Safety version available for use in applications up to PLd
SIKO Global, Draw-wire encoder SGH25
Draw-wire encoder SGH25

  • Measuring range 0 … 2500 mm (98.42 inches)

  • Absolute measuring system

  • Pressure-resistant up to 350 bar, pressure peaks up to 450 bar

Go to Product
SIKO Global, Draw-wire encoder SGH50
Draw-wire encoder SGH50

  • Measuring range 0 … 5000 mm (196.85 inches)

  • Absolute measuring system

  • Pressure-resistant up to 350 bar, pressure peaks up to 450 bar

Go to Product
SIKO Global, Draw-wire encoder SG30
Draw-wire encoder SG30

  • Compact, robust design

  • Variable mounting options

  • Measuring lengths up to 3000 mm

Go to Product
SIKO Global, Draw-wire encoder SG31
Draw-wire encoder SG31

  • Robust design

  • Measuring lengths up to 3000 mm

  • Wire-actuated encoder for rotary encoder with 58 mm servo-flange

Go to Product
SIKO Global, Draw-wire encoder SG32
Draw-wire encoder SG32

  • Robust design

  • Measuring lengths up to 3000 mm

  • Analogue signal output in redundant design (2x 4…20 mA or potentiometer)

Go to Product
SIKO Global, Draw-wire encoder SG61
Draw-wire encoder SG61

  • Robust design

  • Easy mounting

  • Measurement lengths up to max. 6000 mm

Go to Product
SIKO Global, Draw-wire encoder SG62
Draw-wire encoder SG62

  • Robust design

  • Measuring lengths up to 6000 mm

  • Analogue signal output in redundant design (2x 4…20 mA or potentiometer)

Go to Product

SIKO Application Reports

Safety rotary encoder for pile drivers in special civil engineering

Heavy machinery in specialist civil engineering requires precise and reliable components in order to be able to perform the respective functions reliably. The absolute rotary encoders WV58MR from SIKO GmbH, manufacturer of sensors and positioning…

Learn more
SIKO supports the development of harvesting robots

Measurement and sensor solutions from SIKO are not only found in established industrial applications, SIKO GmbH is also currently supporting an agricultural research and development project with two rotary encoders from its range for mobile machines.

Learn more
MORE THAN 60 YEARS OF EXPERIENCE
300 EMPLOYEES WORLDWIDE
GLOBAL PRESENCE IN 50 COUNTRIES
MADE IN GERMANY