Absolute encoder WV3600MR
Magnetic safety rotary encoder with solid shaft
![](/fileadmin/_processed_/c/a/csm_27313_SIL2_LOGO_871991091c.jpg)
![](/fileadmin/_processed_/c/1/csm_27811_CANOPEN_SAFETY_018e3995b9.jpg)
![](/fileadmin/_processed_/2/4/csm_33688_LOGO_SAEJ1939_820f8170bd.jpg)
The smallest safety multiturn rotary encoder for mobile machines! Specially developed for use in mobile machines, the absolute safety rotary encoder WV3600MR provides reliable and precise measured values even under the toughest environmental conditions. Thanks to the innovative safety concept, certified according to SIL2, the WV3600MR can also be used in safety-critical applications up to performance level d. Available as a singleturn and multiturn version and with an outer diameter of only 36 mm, it can also be mounted in applications with extremely limited installation space.
- Smallest safety multiturn rotary encoder for mobile machines
- Single turn or multiturn variant available
- SIL2 (IEC 61508) PLd (DIN EN ISO 13849) certified (in preparation)
- E1 approval by the German Federal Motor Transport Authority (KBA) pending
- Protection class up to IP6K9K
- with PURE.MOBILE technology
Technical drawing
Technical Specifications
Mechanical data
Electrical data
System data
Ambient conditions
Feature
Technical Specifications
Enhancement
shaft
 rustproof stainless steel
Flange
 aluminum
Housing
 rustproof stainless steel
Speed
≤3000
 min-1
with protection classes IP67 and IP6K9K
≤6000
 min-1
with protection class IP65
Moment of inertia
3.5
 gcm²
with protection class IP67
4
 gcm²
with protection class IP6K9K
Starting torque
≤2
 Ncm
 at 20 °C
Shaft load rating
≤60
 N
radial
≤40
 N
axial
≤200
 N
 with protection class IP6K9K
radial
≤200
 N
 with protection class IP6K9K
axial
Feature
Technical Specifications
Enhancement
Operating voltage
8 … 36 V DC
reverse polarity protection
Power input
≤1
 W
 at 36 V
without load
Parameter storage
105 cycles
also applies to calibration operations
Status display
 1x two-color LEDs (red/green)
Device/CAN status
Power rating
±36
 V
CAN interface
Interface
 according to ISO 11898-1, not electrically isolated
CANopen
 according to ISO 11898-1, not electrically isolated
CANopen Safety
 according to ISO 11898-1, not electrically isolated
SAE J1939 Safety
Address
1 … 127
CANopen, CANopen Safety
128 … 238
SAE J1939 Safety
Baud rate
20
 kbit/s
CANopen Safety
50
 kbit/s
CANopen Safety
125
 kbit/s
CANopen Safety
250
 kbit/s
CANopen Safety
500
 kbit/s
CANopen Safety
800
 kbit/s
CANopen Safety
1
 Mbit/s
CANopen Safety
Cycle time
<10
 ms
Starting time
<1000
 ms
Type of connection
 1x M12-plug connector (A-coded)
5-pin, 1x pin (E12E connection type)
 open cable end
Stranded wire cross-section 0.5 mm² ( E1 connection type)
Feature
Technical Specifications
Enhancement
Scanning
 magnetic
Resolution
14
 bit
singleturn, 16384 steps/revolution
Measuring range
1
 rotation(s)
singelturn
4096
 rotation(s)
12 bit
65536
 rotation(s)
16 bit
Feature
Technical Specifications
Enhancement
Ambient temperature
-40 … 85 °C
Storage temperature
-40 … 85 °C
Relative humidity
100
 %
condensation admissible
Protection category
 IP65
EN 60529
 IP67, IP6K9K
EN 60529, ISO 20653, according to assembly instructions and with suitable mating connector
 IP6K9K
ISO 20653
Salt spray test
 severity level 4
EN 60068-2-52, installed according to assembly instructions and with suitable mating connector
More information
pin assignment
E12E
Signal |
PIN |
nc |
1 |
+UB |
2 |
GND |
3 |
CAN_H |
4 |
CAN_L |
5 |
E1
Signal |
Cable color |
nc |
white |
+UB |
brown |
GND |
green |
CAN_H |
yellow |
CAN_L |
gray |
Purchase order
Product configuration
Feature
Select specifications
Enhancement
Select your specifications:
number of revolutions
1
shaft diameter x length
10x20
Mounting type
M1
Protection category
IP65
only with shaft diameter 10 and mounting type M4
position of electrical connection
A
Type of connection
E1
Cable length
OK
only with connection type E12E
in m
only with connection type E1
Accessories
Scope of delivery
- WV3600MR
- Quick Start Guide