Absolute encoder WV3600M
Compact magnetic rotary encoder with solid shaft
![](/fileadmin/_processed_/e/c/csm_27784_CANOPENLOGO_PRINT_e2797370e3.jpg)
![](/fileadmin/_processed_/2/4/csm_33688_LOGO_SAEJ1939_820f8170bd.jpg)
Specially developed for use in mobile machines, the absolute rotary encoder WV3600M provides reliable and precise measured values even under the toughest environmental conditions. Available as a singleturn and multiturn version and with an outer diameter of only 36 mm, it can also be mounted in applications with limited installation space. Despite the compact design, the WV3600M convinces with a wide variety of variants. In addition, the WV3600M has the optimum robustness thanks to its high degree of protection and salt mist-tested housing.
- CANopen (DS406) or SAE J1939 interface
- Extremely compact design with ø36 mm flange
- Single turn or multiturn variant available
- E1 approval by the German Federal Motor Transport Authority (KBA) pending
- Protection class up to IP6K9K
- with PURE.MOBILE technology
Technical drawing
Technical Specifications
Mechanical data
Electrical data
System data
Ambient conditions
Feature
Technical Specifications
Enhancement
shaft
 rustproof stainless steel
Flange
 aluminum
Housing
 rustproof stainless steel
Speed
≤6000
 min-1
with protection class IP65
≤3000
 min-1
with protection classes IP67 and IP6K9K
Moment of inertia
3.5
 gcm²
4
 gcm²
with protection class IP6K9K
Starting torque
≤2
 Ncm
 at 20 °C
Shaft load rating
≤60
 N
radial
≤40
 N
axial
≤200
 N
 with protection class IP6K9K
radial
≤200
 N
 with protection class IP6K9K
axial
Feature
Technical Specifications
Enhancement
Operating voltage
8 … 36 V DC
reverse polarity protection
Power input
≤1
 W
 at 36 V
without load
Parameter storage
105 cycles
also applies to calibration operations
Status display
 1x two-color LEDs (red/green)
Device/CAN status
Power rating
±36
 V
CAN interface
Interface
 according to ISO 11898-1, not electrically isolated
CANopen
 according to ISO 11898-1, not electrically isolated
SAE J1939 Safety
Address
1 … 127
CANopen, CANopen Safety
128 … 238
SAE J1939 Safety
Baud rate
20
 kbit/s
CANopen
50
 kbit/s
CANopen
125
 kbit/s
CANopen, SAE J1939
250
 kbit/s
CANopen, SAE J1939
500
 kbit/s
CANopen, SAE J1939
800
 kbit/s
CANopen
1
 Mbit/s
CANopen
Cycle time
<10
 ms
Starting time
<1000
 ms
Parameter
 according to CiA 301, CiA 303 Part 3, CiA 305, CiA 406
CANopen
 according to SAE J1939-76
SAE J1939 Safety
Type of connection
 1x M12-plug connector (A-coded)
5-pin, 1x pin (E12E connection type)
 open cable end
Stranded wire cross-section 0.5 mm² ( E1 connection type)
Feature
Technical Specifications
Enhancement
Scanning
 magnetic
Resolution
14
 bit
singleturn, 16384 steps/revolution
Measuring range
1
 rotation(s)
singelturn
4096
 rotation(s)
12 bit
65536
 rotation(s)
16 bit
Feature
Technical Specifications
Enhancement
Ambient temperature
-40 … 85 °C
Storage temperature
-40 … 85 °C
Relative humidity
100
 %
condensation admissible
Protection category
 IP65
EN 60529
 IP67, IP6K9K
EN 60529, ISO 20653, according to assembly instructions and with suitable mating connector
 IP6K9K
ISO 20653
Salt spray test
 severity level 4
EN 60068-2-52, installed according to assembly instructions and with suitable mating connector
More information
pin assignment
E12E
Signal |
PIN |
nc |
1 |
+UB |
2 |
GND |
3 |
CAN_H |
4 |
CAN_L |
5 |
E1
Signal |
Cable color |
nc |
white |
+UB |
brown |
GND |
green |
CAN_H |
yellow |
CAN_L |
gray |
Purchase order
Product configuration
Feature
Select specifications
Enhancement
Select your specifications:
interface/
protocol
CAN
number of revolutions
1
shaft diameter x length
10x20
Mounting type
M1
Protection category
IP65
only with shaft diameter 10
position of electrical connection
A
Type of connection
E1
Cable length
OK
only with connection type E12E
in m
only with connection type E1
Accessories
Scope of delivery
- WV3600M
- Quick Start Guide