Draw-wire encoder SG62
robust design and redundant sensor system with 6000 mm measuring length
![](/fileadmin/_processed_/0/c/csm_27865_ANALOG_3836ce3403.jpg)
Very robust wire-actuated encoder in compact design for numerous areas of application including crane construction, stage construction, warehousing technology, etc., up to a measuring length of 6000 mm, with signal output in redundant design.
- Robust design
- Measuring lengths up to 6000 mm
- Analogue signal output in redundant design (2x 4…20 mA or potentiometer)
- Very robust measuring rope (stainless steel)
- IP65 protection class
- M12 plug connection
Technical drawing
Technical Specifications
Mechanical data
Electrical data
System data
Ambient conditions
Feature
Technical Specifications
Enhancement
Weight
~0.8
 kg
Housing
 aluminum/plastic
Wire design
ø0.54
 mm
rustproof stainless steel
Extension force
≥8
 N
Measured distance/ rope drum revolution
200
 mm
Geber Potentiometer
Feature
Technical Specifications
Enhancement
Operating voltage
≤30
 V DC
power loss on the potentiometer <1 W
Power rating
2
 W
 at 70 °C
resistance
10
 kΩ
Resistance tolerance
±5
 %
Standard terminal resistance
0.5 % or 1 Ω
the higher value always applies
Linearity tolerance
±0.25
 %
Type of connection
M12 plug connector (A-coded)
8-pole, 1x pin
Messwandler, Stromausgang
Feature
Technical Specifications
Enhancement
Operating voltage
10 … 30 V DC
between I+ and I-, at ≤500 Ω load
Output current
4 … 20 mA
 (2x)
4/20mA 4/20mA
20 … 4 mA
 (2x)
20/4mA 20/4mA
4 … 20 mA, 20 … 4 mA
4/20mA 20/4mA
Type of connection
 M12 plug connector (A-coded)
8-pole, 1x pin
* Transducers enable optimal adaptation of output current or output voltage to the measuring range. The measuring transformer is factory preset so that an output signal of 4 … 20 mA or 20 … 4 mA is available between the start and end points of the measuring range.
Feature
Technical Specifications
Enhancement
Repeat accuracy
±0.25
 mm
per direction of approach
Measuring range
5000
 mm
,
6000
 mm
Travel speed
≤800
 mm/s
Failure rate
166.7
 Year(s)
at 60 °C (MTBF)
Feature
Technical Specifications
Enhancement
Ambient temperature
-40 … 80 °C
Relative humidity
 condensation inadmissible
EMC
 EN 61000-6-2
interference resistance / immission
 EN 61000-6-4
emitted interference / emission
Protection category
 IP65 (for electronic unit)
EN 60529, certonally coated electronics
More information
pin assignment
Potentiometer pin assignment
Signal |
PIN |
Additional information |
Po |
1 |
Potentiometer 1 |
Po |
2 |
Potentiometer 2 |
S |
3 |
Potentiometer 2 |
Pe |
4 |
Potentiometer 2 |
nc |
5 |
|
Pe |
6 |
Potentiometer 1 |
S |
7 |
Potentiometer 1 |
nc |
8 |
Connection assignment of transducer
Signal |
Additional information |
|
I+ |
1 |
Transducer 1 |
I+ |
2 |
Transducer 2 |
nc |
3 |
|
I- |
4 |
Transducer 2 |
nc |
5 |
|
I- |
6 |
Transducer 1 |
nc |
7 |
|
nc |
8 |
Hint for mounting
When securing the wire it must be ensured that the wire is straight and vertical in relation to the wire outlet. Recommendation: Only select the starting position after an unwound length of approx. 5 mm. This prevents the wire hitting the end stop when it is rewound.
Symbolic representation
Purchase order
Product configuration
Feature
Select specifications
Enhancement
Select your specifications:
Measuring range
5000
in mm
rope fixture
GW
encoder type
P10_P10
series impedance
1k2
Accessories
Scope of delivery
- SG62
- Installation Instructions